background image

TABLE OF CONTENTS 

 

1


31KX41K     31DX22B 

HITACHI 
SOLID STATE COLOR TV 

31KX41K  

31DX22B 

OPERATING GUIDE 

Your new HITACHI Color TV incorporates a host of features designed to give you 
excellent performance if you follow the instructions in this manual. We recommend that 
you read the following instructions and "IMPORTANT SAFEGUARDS" notice before 
turning on your TV set for the first time. 

This television receiver will display television closed captioning (

 or 

) in 

accordance with paragraph 15.119 of the FCC rules. 

TABLE OF CONTENTS 

TABLE OF CONTENTS ............................................................................................................................ 1 
IMPORTANT SAFEGUARDS .................................................................................................................. 3 

POWER SOURCE

................................................................................................................................ 3 

BEFORE OPERATING YOUR TV SET ................................................................................................... 9 

INSTALLATION

.................................................................................................................................... 9 

ANTENNA CONNECTIONS

............................................................................................................. 11 

HOOK-UP CABLES AND CONNECTORS ........................................................................................... 13 

TIPS ON REAR PANEL CONNECTIONS

...................................................................................... 13 

LOCATION OF CONTROLS .................................................................................................................. 14 
FRONT PANEL JACKS AND CONNECTIONS.................................................................................... 14 
HOW TO SELECT CHANNELS ............................................................................................................. 15 
PICTURE CAUTIONS ............................................................................................................................. 17 
THE GENIUS REMOTE CONTROL (CLU-692GR with P-in-P) 31KX41K......................................... 18 
THE GENIUS REMOTE CONTROL (CLU-681GR without P-in-P) 31DX22B.................................... 19 
HOW TO USE THE GENIUS REMOTE TO CONTROL YOUR T.V................................................... 20 
HOW TO USE THE REMOTE TO CONTROL YOUR T.V. ................................................................. 20 
-SET UP- FUNCTIONS............................................................................................................................ 23 
PICTURE-IN-PICTURE FUNCTIONS (31KX41K)............................................................................... 30 

P IN P BUTTON

.................................................................................................................................. 30 

-PICTURE- FUNCTIONS ........................................................................................................................ 32 
-SOUND- FUNCTIONS ........................................................................................................................... 33 
USING THE GENIUS REMOTE TO CONTROL VCR FUNCTIONS .................................................. 35 

Summary of Contents for 31DX22B
















































Reviews: