background image

LOCATION OF CONTROLS 

 

14

• The S-Video connection is provided for high performance laser discs, VCR's, etc. that 
have this feature. Use this connection in place of the standard video connection if your 
device has this feature. 
• If your device has only one audio output, connect it to the left audio jack on the TV. 
• Refer to the operating guide of your other electronic equipment for additional 
information on connecting your hook-up cables. 

LOCATION 

OF 

CONTROLS 

        

Details are described on the page shown by the number attached to the part name 
(example:  ). 

Front view illustration 

NOTE:

 The front and rear view shows the illustration for the 31DX22B Table Top. The 

31KX41K console with VCR storage is not shown bu the controls and terminals are the 
same. 

Rear view illustration 

FRONT PANEL JACKS AND CONNECTIONS  

 

 

 

• The front panel jacks are provided as a convenience to allow you to easily connect a 
camcorder or VCR as shown in the following examples. 

Front panel connections illustration 

NOTE: 

• Completely insert the connection cord plugs when connecting to front panel jacks. If you 
do not, the played back picture may be abnormal. 

Summary of Contents for 31DX22B
















































Reviews: