JVC AV-32T4 Instructions Manual Download Page 26

Page: 26 / 40

AV-32T4SA / LCT1673-001A-H/ English

SET UP menu

AUTO PROGRAM

The AUTO PROGRAM function TV
channel automatic registration which was

performed in the “Initial settings” (page 4)
can be preformed again.

1 Choose AUTO PROGRAM, then

press the

button

The COUNTRY menu appears as a sub-
menu of the AUTO PROGRAM function.

There are two COUNTRY menus.
Pressing the yellow button changes the
COUNTRY menu as follows:

2 Press the

and

buttons to

choose the country where you are

now located

• If you are located in Australia, we

recommend you to choose
DEUTSCHLAND.

3 Perform steps 5 and 6 of the “Initial

settings” (page 5)

EDIT/MANUAL

The EDIT/MANUAL functions are divided
into two types: editing of the current
Programme numbers (PR) (EDIT functions)

and manual registration of a TV channel you
want to view to the Programme number (PR)
(MANUAL function). The details about
these functions are as follows:

MOVE:

This function changes a Programme number

(PR) of a TV channel.

ID:

This function registers a Channel name (ID)
to a TV channel.

INSERT:

This function adds a new TV channel in the
current Programme numbers (PR) list by

using the CH/CC number.

• You cannot use the INSERT function if

you do not know a Channel number of a
TV channel. Use the MANUAL function
to register a TV channel in the

Programme number (PR).

DELETE:

This function deletes an unnecessary TV
channel.

MANUAL:

This function manually registers a new TV
channel in a Programme number (PR).

Caution

• Using the MOVE, DELETE or INSERT

function rewrites the current Programme

numbers (PR) list. Resultingly, the

Programme number (PR) of some of the

TV channels will change.

• Using the MANUAL function for a TV

channel for which the CHILD LOCK

function has been set cancels the CHILD

LOCK function for the TV channel.

• Using the MANUAL function for a TV

channel for which the DECODER (EXT-2)

function has been set to ON returns the

setting of the DECODER (EXT-2) function

for the TV channel to OFF.

• When a TV channel has already been

registered in PR 99, using the INSERT

function deletes the TV channel.

D0029-EN

SET UP

AUTO PROGRAM

EDIT/MANUAL

LANGUAGE

DECODER(EXT-2)

EXT SETTING

PICTURE TILT

OFF

D0003-EN

COUNTRY

START

AV-32T4S_Eng.book Page 24 Monday, June 21, 2004 10:40 AM

Summary of Contents for AV-32T4









































Search results

Summary of Contents for AV-32T4

Reviews:

Related manuals for AV-32T4

Brands by name

Popular brands

JVC AV-32T4, Instructions Manual

Search results

Summary of Contents for AV-32T4

Reviews:

Related manuals for AV-32T4

Brands by name

Popular brands