JVC AV-29FH1BUG, Service Manual

Page: 26 / 48

12
PAGE SELECTION
PICTURE/OK
- Set the VCR / / DVD switch (A25) to the (teletext) position.
- Press the remote control
TELETEXT
( ) button (A8) to select teletext mode.
- To return to TV mode, press again the TELETEXT ( ) button (A8).
-
Note
: Some of the buttons may not work if the VCR / / DVD) switch is not set to
the (teletext) position.
- You can directly enter the 3 figure page number by using the remote control NUMBER 0..9 buttons (A3).
- You can sequentially select teletext pages by pressing the remote control PAGE UP (A11) / DOWN (A12) buttons.
COLOUR buttons FOR TELETEXT
- A red, green, yellow, and blue field is shown at the bottom of the screen. If TOP or FLOF teletext (FASTTEXT) is transmitted
by the station, pressing the corresponding colour button on the remote controller, you can select the desired page easily.
Once a request is made, the page number is shown in the extreme top left corner of the screen. If the requested page is not
immediately available the rolling header will be active until the page arrives.
INDEX button (A23):
Allows you to return directly to the initial teletext page.
PAGE HOLD button (A16)
Several sub pages can be combined under a page number and are scrolled at an interval determined by the television station.
The presence of sub pages is indicated by, for example, 3/6 beneath the time, which means that you are looking at the 3rd page
of a total of 6 pages. If you want to look at a subpage for a longer period of time, press the
HOLD button. " " appears at the
top of the screen and the contents of the subpage shown are kept on the screen and no longer updated or switched to other
subpages. Pressing the
HOLD button again, the current subpage appear.
SUBPAGE button
(A24):
Allows you to request a specific subpage:
- Press the
SUBPAGE button. At the base of the screen a SUBPAGE menu will appear. This has a red subpage minus link, a
green subpage plus link, plus a white background showing (example for page 110), 110 / 0001. This is ready to accept the
subpage number.
- Enter directly the subpage number you want with the remote control NUMBER 0..9 buttons (A3): for example to request the
2nd subpage, type 0002.
- Alternatively, use the red subpage minus link or the green subpage plus link.
- The subpage number entered is shown at the base of the screen.
- If the requested page is not immediately available the rolling header will be active until the page arrives.
Warning : If the subpage is not available (does not exist), then the header will roll continuously and no new page will be found.
- To exit subpage mode, press the SUBPAGE button (A24) again.
Note : Teletext specification allows for subpage numbers 0000 to 3979 (the first figure is limited to the range 0..3, and the third
figure 0..7).
i
ENTERING/LEAVING TELETEXT MODE
USEFUL TELETEXT FUNCTIONS
TELETEXT
E
N
G
LIS
H