JVC AV-29FH1BUG, Service Manual

Page: 22 / 48

8
DAILY USE
SWITCHING ON AND OFF TV SET
1 2 3
4 5 6
7 8 9
0
P
P
PROGRAM SELECTION (FROM 0 TO 99)
LIST menu
Press on the CYAN button (A7) to display the LIST menu. Then use the CURSOR UP (A11) or DOWN (A12) buttons
to browse the list and find a program, with the aid of the program numbers plus associated names (see section
Manual Channel Tuning pages 5/6 for how to add or modify program names).
When you have found a program you want to select (the highlighted line in the middle of the menu), press on the
OK
button (A9) to tune this program. The LIST menu will disappear at the same time.
If you decide to keep the current program, the menu can be cancelled at any time by pressing on the CYAN button
(A7).
Direct selection
Use the remote control NUMBER 0..9
buttons (A3). For two digit program
numbers, enter the second digit within
2 seconds.
Up / Down selection
Use the remote control PROGRAM UP
(A11) / DOWN (A12) buttons or the TV
set front panel PROGRAM UP / DOWN
buttons (B10).
11
10
09
08
07
06
05
04
03
02
01
00
99
98
97
96
95
94
93
92
91
- - - - - - -
- - - - - - -
- - - - - - -
- - - - - - -
- - - - - - -
CHANNEL 5
S4C
CHANNEL 4
ITV
BBC2
BBC1
- - - - - - -
- - - - - - -
- - - - - - -
- - - - - - -
- - - - - - -
- - - - - - -
- - - - - - -
- - - - - - -
- - - - - - -
- - - - - - -
SWITCHING OFF
Press
POWER
button (A2) on the remote control to return the set to its
STAND BY
mode. If you don't use the set for an extanded period of time, turn it off with MAIN
POWER button (B1) on the set.
E
N
G
LIS
H
SWITCHING ON
If stand-by indicator (B6) is not lit, then the TV set is powered off.
Switch the set ON with POWER (ON/OFF) Button (B1), then, stand-by
indicator turns to red.
Press again
PROGRAM UP
or
DOWN
buttons (B10) on the front of the set, or
POWER button (A2) or UP/DOWN button (A11) or, one of the NUMBER 0...9
button on the remote control, then stand-by indicator turn to green and picture
appears on the screen.
If stand-by indicator (B6) is flashing red and green, TV set is in CHILD LOCK
mode. To deblock CHILD LOCK, press the remote control POWER button (A2) or
one of NUMBER 0...9 buttons (A3) or PROGRAM UP (A11) / DOWN (A12)
buttons.
Note : The front panel PROGRAM UP or DOWN ( B10) button will not function
when CHILD LOCK is ON.