JVC AV-29FH1BUG, Service Manual

Page: 20 / 48

STORING CHANNEL NAME
When one channel is tuned, the corresponding station NAME will be detected automatically. But in some cases, NAME will
not be detected due to the broadcasting situation. You may put in the channel NAME yourself.
Position the cursor to
NAME menu and press the remote control CURSOR RIGHT (A14) button. A cursor appears on the left
end of NAME line ("-----"). Then press CURSOR UP (A11) or DOWN (A12) buttons untill you get the right letter or symbol.
Move the cursor to the next position by using CURSOR LEFT (A13) or RIGHT (A14) buttons and repeat the operation.
Press OK (A9) button to store the NAME.
PROGRAM MENU
The number on the right side of the PROGRAM menu indicates the program number of the currently displayed channel.
STORE TO MENU
Select STORE TO menu and select the program number by 0....9 buttons or CURSOR LEFT (A13) or RIGHT (A14)
buttonsto which you want to store the currently displayed channel then press OK button.
Warning ! If you store the number already programmed, the previous programmes will be erased automatically.
CHANNEL AND FREQUENCY MENU
If you know the channel or frenquency number you want to search, enter the data by 0...9 buttons. TV will tune that channel
quickly.
CAUTION TO T-V LINK COMPATIBLE VCR USER :
After any channel arrangement modification you must also update the data memorised in your VCR. This can be done easily
with the T-V LINK. See page 5 : DOWNLOADING THE DATA TO VCR.
ACTIVATING MANUAL TUNING
Move the cursor to FREQUENCY (channel frequency) menu and press and hold for more than 2 seconds the remote control
CURSOR LEFT (A13) or RIGHT (A14) buttons. When one channel is tuned, the corresponding station name is indicated
automatically in NAME menu.
To tune the next channel, press the remote control
CURSOR LEFT
(A13) or
RIGHT
(A14) buttons again.
BROADCASTING SYSTEM SELECTION
Select INSTALL m enu and using the remote control CURSOR UP (A11) / DOWN
(A12) buttons, move the cursor to SYSTEM menu and select the appropriate system
by the LEFT (A13) or RIGHT (A14) button.
"FRANCE" France SECAM L/L'
"GB" Great Britain / Ireland PAL-I/I'
"EURO" Westen Europe PAL-SECAM B/G
"E/EURO" Eastern Europe PAL-SECAM D/K
6
PERFORM FINE TUNING
If you are unable to obtain good picture or reasonable sound volume due to poor reception it is possible to perform fine tuning.
- Select the " FREQUENCY " menu.
- Press for less than 2 seconds, the remote control CURSOR LEFT (A13) and CURSOR RIGHT (A14) buttons to activate
FINE TUNING in steps of 0.05 MHz(50kHz).
E
N
G
LIS
H