JVC AV-29FH1BUG, Service Manual

Page: 19 / 48

5
PICTURE/OK
SKIPPING THE CHANNELS
Position the cursor to the programme number you wish to skip, then press the
RED (SKIP) (A4) button. A skipped programme is marked with the sign " "
at its right end. The channel corresponding to a skipped programme will not
appear on screen when changing channels using
PROGRAM UP
(A11) /
DOWN (A12) buttons.
E
N
G
LIS
H
USING THE DECODER (EXT -2) FUNCTION WITH T-V LINK:
When connecting a T-V lINK compatible VCR to the EXT-2 terminal, be sure to connect the Decoder to the VCR.
If not the T-V LINK function may not work properly.
Position the cursor to the channel capable of being unscrambled with the decoder on EXT-2, then press the
" CYAN " (A7) button. A channel functioning with a decoder is marked with the icon of a key beside the program
number.
Even if the decoder is functioning a scrambled picture appears at this time. The decoded signal won't be visible
until you exit EDIT and INSTALL menus.
In the EDIT menu, you can transmit the latest Program number data to the VCR with the T-V LINK function. To
start the data transfer, you must press and hold OK button for 3-4 seconds until " TV VCR " is displayed
flashing in the header of EDIT menu.
Caution : This operation will only be succesful if a T-V LINK compatible VCR is connected to the EXT-2
terminal, and if the VCR is ON.
Once the data transmission ends, the " TV VCR " indicator disappear and the EDIT menu
vanishes after 3 sec.
Note : If the TV is unable to transfer the data, the feature not available is displayed in the header of EDIT
menu in red to indicate an error. In such case, ensure the following three items are correct.
- Has the T-V LINK compatible VCR been connected to the EXT-2 terminal?
- Has the VCR power been turned ON?
- Does the SCART cable that is connected to the EXT-2 terminal to T-V LINK compatible VCR have all
proper connections?
If above is OK, then press and hold 3-4 seconds again.
DOWNLOADING THE DATA TO VCR WITH T-V LINK
Tuning by ATSS (Auto Tuning Sorting System) is recommendable, as it is the easiest tuning method. But Manual Tuning is
also possible using the following procedure.
MANUAL CHANNEL TUNING
DELETE PROGRAMME POSITION DATA
Position the cursor to the programme number you wish to delete using the
remote control UP (A11) or DOWN (A12) buttons. Press the YELLOW/DELETE
(A6) button.
The delete programme is instantly moved to programme N° 99. The programme
which was located at N° 99 will automatically move to N° 98.
P
PICTURE/OK