No. 52084
AV-29BF11ENS
AV-29BF11EPS
AV-29BF11EES
21
Item
Measuring
instrument
Test point
Adjustment part
Description
HORIZONTAL
PINCUSHION
adjustment
(50Hz)
Signal
generator
Remote
control unit
HPIN
1. Receive a PAL B/G cross-hatch pattern signal of vertical
frequency 50Hz.
2. Enter
GEOMETRY
MENU.
3. Select HPIN (Horizontal pincushion) with the FUNCTION
( / ) key.
4. Adjust HPIN with the FUNCTION ( / ) key until the bending
of the vertical line of the cross-hatch pattern are corrected.
5. Check and readjust HPIN item if the adjustment becomes
improper after some other geometric adjustments are done.
HORIZONTAL
CORNER
CORRECTION
adjustment
(50Hz)
Signal
generator
Remote
control unit
HCCO
1. Receive a PAL B/G cross-hatch pattern signal of vertical
frequency 50Hz.
2. Enter
GEOMETRY
MENU.
3. Select HCCO (Horizontal corner correction) with the
FUNCTION ( / ) key.
4. Adjust HCCO with the FUNCTION ( / ) key until the bending
of the vertical line of the cross-hatch pattern are corrected.
5. Check and readjust HCCO item if the adjustment becomes
improper after some other geometric adjustments are done.
HORIZONTAL
TRAPEZOID
adjustment
(50Hz)
Signal
generator
Remote
control unit
HTRP
1. Receive a PAL B/G cross-hatch pattern signal of vertical
frequency 50Hz.
2. Enter
GEOMETRY
MENU.
3. Select HTRP (Horizontal trapezoid) with the FUNCTION
( / ) key.
4. Adjust HTRP with the FUNCTION ( / ) key until both lengths
of the upper side and lower side of the cross-hatch pattern
become equal.(
A
=
B
)
A
B