JVC 0305MKH-CR-MU Instruction Manual Download

Page: 129 / 135

Additional preparation

AV-32/28H5SK / LCT1806-001A-U / English

Devices which can output the S-

VIDEO signal (Y/C signal) such as

a S-VHS VCR

Connect the device to an EXT terminal other
than the EXT-1 terminal.
You can choose a video input signal from the

S-VIDEO signal (Y/C signal) and regular
video signal (composite signal). For details
of how to operate the device, see “S-IN (S-

VIDEO input)” on page 34.

T-V LINK compatible VCR

Be sure to connect the T-V LINK compatible
VCR to the EXT-2 terminal. If not, the T-V
LINK function will not work properly.

• When connecting a T-V LINK compatible

VCR to the EXT-2 terminal, be sure to

connect the Decoder to the VCR. If not,
the T-V LINK function may not work
properly. After you have registered TV

channels to the Programme numbers (PR),
set the DECODER (EXT-2) function for
the Programme number (PR) to ON in

order to unscramble a scrambled TV
channel. For details of operation, see
“DECODER (EXT-2)” on page 33.

Connecting headphones

Connect the headphones with a stereo mini-

jack (of 3.5 mm in diameter) to the
headphone jack at the TV rear panel.

• When you connect the headphones, no

sound comes from the TV speakers.

Video/sound signal output from

the EXT-2 terminal

You can arbitrarily change over the output of
the video/sound signal from the EXT-2
terminal. It is useful when you want to dub

the video/sound from another device on the
VCR connected to the EXT-2 terminal. For
details on how to do this operation, see

“DUBBING” on page 35.

TV output from the EXT-1 terminal

The output of video/sound signal of a TV

channel you are currently viewing is always
output from the EXT-1 terminal.

• Changing over a Programme number (PR)

also changes over the TV output from the
EXT-1 terminal.

• The video/sound signal from an EXT

terminal cannot be output.

• Teletext programmes cannot be output.

Connecting Speakers/Amplifier

While referring to the Audio equipment
connection diagram, connect the audio

equipment you desire to the TV.
You can use external front speakers to listen
to the TV sound instead of the TV speakers.

Before connecting anything:

• Read the manuals provided with the

amplifier and speakers.

• Turn the TV and Amplifier off.
• To prevent magnetism from the speakers

adversely effecting the TV screen, use
magnetic-shielded speakers for the front
speakers.

• Note that connecting cables are not

supplied.

• The output from the AUDIO OUT

terminal is not interrupted by headphone

connection to the TV. You cannot cut the
sound from the front speaker even if you
connect a headphone to the TV.

• Adjust the volume of the external

speakers with the amplifier.

Back of the TV

Amplifier

Front speakers (Magnetic-shielded type)

AV-32&28H5SK_Eng.book Page 38 Wednesday, February 16, 2005 10:19 AM

Summary of Contents for 0305MKH-CR-MU








































































































































Search results

Summary of Contents for 0305MKH-CR-MU

Reviews:

Related manuals for 0305MKH-CR-MU

Brands by name

Popular brands

JVC 0305MKH-CR-MU, Instruction Manual

Search results

Summary of Contents for 0305MKH-CR-MU

Reviews:

Related manuals for 0305MKH-CR-MU

Brands by name

Popular brands