JVC 0305MKH-CR-MU Instruction Manual Download

Page: 108 / 135

Remote control buttons and functions

AV-32/28H5SK / LCT1806-001A-U / English

Adjusting the visible area of the

picture

If subtitles or the top (or bottom) of the

picture are cut off, adjust the visible area of

the picture manually.

1 Press the

button

The ZOOM menu appears.

2 Press the

button to display the

ZOOM mode indication

Indicator is displayed.

3 While it is displayed, press the

buttons to adjust the visible area

vertically

• You cannot adjust the visible area in

REGULAR or FULL mode.

The visible area adjustment is saved even
after the TV channel is changed.
However, it is cancelled if the following

operations are performed.

• The power is turned off/on
• The ZOOM mode is changed
• The

(Text) button is pressed

• The TV is switched between TV mode

and EXT mode

HYPER SOUND function

You can enjoy sounds with a wider

ambience.

Press the

(HYPER SOUND) button

to turn the HYPER SOUND function on

or off

• The HYPER SOUND function does not

work properly with mono sound.

• The HYPER SOUND function can be

also turned on or off by using the SOUND

menu. For details, see “HYPER SOUND”
on page 25.

Return to TV channel instantly

You can return to a TV channel instantly.

Press the

button

The TV returns to the TV mode and a TV

channel appears.

Operating a JVC brand VCR or

DVD player

You can operate a JVC brand VCR or DVD
player. Pressing the button having the same
appearance as the original remote control

button of a device makes the function work
in the same way as the original remote
control.

1 Set the VCR

DVD Switch to the

VCR or DVD position
VCR:

When you are operating the VCR, set the
switch to the VCR position.

DVD:

When you are operating the DVD player,
set the switch to the DVD position.

2 Press the VCR/DVD Control Button

to control your VCR or DVD player

• If your device is not made by JVC,

these buttons cannot be used.

• Even if your device is made by JVC,

some of these buttons or any one of the

buttons may not work, depending on
the device.

• You can use the

buttons to choose

a TV channel. The VCR will receive or
choose the chapter the DVD player

plays back.

• Some DVD player models use the

buttons for both operating of Fast

forward/backward functions and
choosing the chapter. In this case, the

253

buttons do not work.

16 : 9 ZOOM

D0010-EN

AV-32&28H5SK_Eng.book Page 17 Wednesday, February 16, 2005 10:19 AM

Summary of Contents for 0305MKH-CR-MU








































































































































Search results

Summary of Contents for 0305MKH-CR-MU

Reviews:

Related manuals for 0305MKH-CR-MU

Brands by name

Popular brands

JVC 0305MKH-CR-MU, Instruction Manual

Search results

Summary of Contents for 0305MKH-CR-MU

Reviews:

Related manuals for 0305MKH-CR-MU

Brands by name

Popular brands