5
www.juwent.com.pl
1. INTENDED USE
TERM-E heating and ventilation units, are intended to heat and ventilate such compartment as:
industrial halls, warehouses, workshops, other objects of similar use
The units should be used only according to the intended use.
The manufacturer is not liable for using the units against the intended use and for any
damages arisen for this reason.
TERM 1; 2; 3 and 4 units cannot be used in the compartments with relative humidity
larger than 95% and air dust concentration over 3mg/m
3
.
The compartment can be served by one or larger number of the units, also by the units of different
sizes. The units can operate as heating or heating and ventilation units with added intake boxes and
wall or roof intakes. The intake boxes enable to draw circulating air through grids located on either
side of the box and fresh air through an inlet hole of the intake box.
2. DESIGNATIONS
Heating and ventilation unit
TERM-E
-27-D
Heating power
18, 27 kW
Equipment
single-row grid (K);
slot diffuser (N);
discharge cone (D);
Marking of unit’s optional automation
AT-RTA
Supply and control box AT
Additional elements
temperature regulator (RTA)
timer (ZG)
regulator and timer (RTA + ZG)
3. DEVICE DESCRIPTION
W skład aparatu wchodzą:
»
axial fan
mounted on the rear wall of the unit with a net protecting the rotor;
»
electric heaters
with spirally rolled aluminium finned tubes;
»
casing
made of steel sheets with a single-row outlet grid allowing adjusting a direction of supply
air. The structure of grid blades protects against an automatic rearrangement of the blades.
The single-row grid can be replaced with the slot diffuser or outlet nozzle.
The casing can be made of stainless steel sheets.
»
protection net
made of galvanized steel sheet against accidental contact with heaters,
The casing variant with the following items is recommended to use with the units which are planned
to be operated as ceilings ones:
»
slot diffuser - for heating a zone of human presence by a secondary air stream;
»
discharge cone - for increasing a range of supply air stream.
