Justgo.uk.com
LT 100 panel
The switches and push buttons of
the panel are sensor touchpads. the
switching function is triggered by
touching
Please note:
There are no separate switches for the
water pump and the interior lighting.
As soon as the panel is switched on the
pump will prime the water system, and the
interior lights can be used.
The fridge will not work unless the LT100
habitation panel is switched on. Therefore,
even when driving and setting the fridge
to van engine (battery) setting, the
habitation panel must be turned on. It is
therefore essential that the fresh water
tank has enough water in it to enable the
water pump to keep the water system
primed, and that the Frost Protection
switch has not tripped.
4
1
On/Off
Turns the control panel, internal lights and water
pump on/off. Please note: Turning off the panel also
turns off the fridge,
2
Mains connection symbol
The yellow LED light next to the mains connection
symbol is lit when the vehicle is connected to elec-
trical hook up (external mains supply)
3
Battery voltage
Displays the voltage of the leisure/living area battery
4
Fresh Water Tank
Push button to show tank fill level for fresh water
tank
5
Grey Water Tank
Push button to show tank fill level for grey water
tank
6
Battery Voltage Display
LEDs light up to display the voltage of the leisure/
living area battery.
7
Water Tank Level Display
LEDs light up to display fill level of water in fresh
and grey water tanks
