©Just go motorhomes 2021
Toilet
Using the Swivel Toilet
The flushing of the toilet is fed directly from the water
system of the vehicle.
The toilet bowl can be rotated into the required position.
In order to do this, with both hand firmly holding the
upper part of the toilet
2
rotate the toilet into the
desired postion.
The operating unit with the flush button
1
is installed
near to the toilet bowl.
Before flushing open the sliding trap of the toilet. To
do this, push the slide lever left
3
.
For flushing, press the blue flush button
1
After flushing close the sliding trap. To do this, push
the slide lever right.
The colour of the level indicator
4
changes from green
to red whenever the sewage tank has to be emptied.
When not in use or when the vehicle is in motion,
ensure the grey sliding lever
3
is securely closed
Emptying the cassette
1
Unlock toilet cassette door with key and push both
buttons in to open.
2
Lift coloured lever and pull the cassette out using the
handle, see (fig 1).
3
Rotate moveable arm straight and unscrew cap. see
(fig 2).
4
Pour contents in a designated waste disposal area
and rinse with water.
5
Use cap to measure 150mls of chemical and pour
into arm then add up to 2 litres of water to mix. Then
screw cap back on and return grey arm to original
position.
Please remember there is a charge of £150 if you don't
return it empty. There are no emptying facilities at Just go.
Fig 1
Fig 2
13
1
2
3
4
