©Just go motorhomes 2021
Using the TV, USB & DVD System
Using the TV
1
Ensure lights are turned on via the control panel
(same circuit as TV).
2
Ensure on/off rocker switch on the TV is on. Located
either on the back panel of the TV or on the bottom
of the screen surround.
3
Turn on TV using the red button at the top of the
remote.
4
Hold down tune button (AQT).
5
Select the country you are in using the side arrows,
then press OK (tuning can take up to 15 minutes).
6
A target region box will then appear; use arrow
controls to select appropriate options then press OK.
7
Use channel selection button or guide button to
browse channels.
To operate TV turn on internal lights
Using the USB input / DVD player
1
Insert USB drive into the back of the TV or DVD into
the slot on the right side of TV.
2
Use source button on remote to select USB or DVD (if
it doesn’t automatically play).
3
If using USB drive select desired video using left and
right arrows, then press OK button to play.
You may have to retune when you enter different
counties or countries.
We cannot guarantee reception in some areas due to
poor / weak signal strength
The Remote
On / Off
Button
Channel
Selection
Source
Selection
Tune
Button
Push the silver lever up and
pull unit towards you
Dependant on model either
pull up or pull unit down
17
Dependant on the model, specifications on
mystery vehicles may differ from standard
Just go specifications. Some vehicles are
not equipped with a television.
