50
6 Maintenance
E
If you want to descale the machine at a later point in time, turn
the Rotary Switch until
START NO
is displayed. Exit the
maintenance programme by pressing the Rotary Switch. The
prompt ‘Decalcify machine’ remains on the display.
c T
Press the maintenance button.
EMPTY TRAY
T
Empty the drip tray and coffee grounds container and put
them back into the machine.
SOLVENT IN TANK
T
Remove the water tank and empty it.
T
Completely dissolve the contents of one blister (3 JURA des-
caling tablets) in a container that holds 600 ml of water. This
may take several minutes.
T
Pour the solution into the empty water tank and insert it in
the machine.
SOLVENT IN TANK
/
PRESS RINSE
, the mainte-
nance button
c
lights up.
T
Remove the frother from the Connector System
©
.
T
Place a receptacle under the hot water spout and another
under the Connector System
©
.
c T
Press the maintenance button.
DECALCS
, water flows out of the Connector System
©
and
the hot water spout. The maintenance button
c
flashes
during the descaling operation.
E
You can follow the current status of descaling on the progress
bar.
The process is interrupted,
EMPTY TRAY
.
T
Empty the receptacles below the hot water spout and the
Connector System
©
.
T
Empty the drip tray and coffee grounds container and put
them back into the machine.
RINSE WATER TANK
/
FILL WATER TANK
T
Remove the water tank and rinse it thoroughly.
T
Fill the water tank with fresh, cold water and reinsert.
PRESS RINSE
, the maintenance button
c
lights up.
T
Refit the frother.
Summary of Contents for IMPRESSA XS90
Page 5: ...5 Important Safeguards...
