Jura IMPRESSA XS90, Manual

Page: 32 / 64

32
4 Preparation at the touch of a button
Precondition :
COFFEE READY
is displayed.
T
Take the protective cover off the Easy Cappuccino Frother.
T
Attach the milk pipe to the frother.
T
Connect the other end to an original JURA milk container or
immerse it directly into the milk.
T
Place a glass under the frother.
q T
Press the Latte Macchiato button.
LATTE MAC.
and the coffee strength are displayed.
The milk foam is then prepared. The operation stops auto-
matically when pre-set amount of milk is reached.
E
A brief interval follows during which the hot milk separates
from the milk foam. This enables the formation of the typical
layers of a latte macchiato. The duration of this interval can be
defined in programming mode.
Coffee preparation then begins. The pre-set amount of
water flows into the glass. Preparation stops automatically.
ENJOY
appears on the display.
COFFEE READY
is then
displayed.
To ensure that the frother works perfectly, you should rinse and
clean it regularly. The description for this can be found in Chapter 6
‘Maintenance – Cappuccino frother’.
You can choose a second coffee blend, for example decaffeinated
coffee, with the filler funnel for pre-ground coffee.
E
Never add more than two level measuring spoons of pre-
ground coffee.
E
Use pre-ground coffee which is not ground too finely. Very
fine coffee can block up the system so that the coffee only
comes out in drips.
E
If you did not fill the machine with a sufficient amount of pre-
ground coffee,
NOT ENOUGH PRE-GROUND
is displayed
and the IMPRESSA stops operation.
Latte macchiato with the
Easy Cappuccino Frother
Pre-ground coffee