21
2 Preparing and using your IMPRESSA for the first time
This setting can be changed in programming mode so that the
machine automatically activates the switch-on rinse (see Chapter 5
‘Permanent settings in programming mode – Rinses’).
Precondition
: Your IMPRESSA is switched on at the power switch
and the on/off button
Q
is illuminated (standby).
Q T
Press the on/off button to switch the IMPRESSA on.
WELCOME TO JURA
appears briefly on the display.
HEATING UP
PRESS RINSE
, the maintenance button
c
lights up.
T
Place a receptacle under the coffee spout.
c T
Press the maintenance button.
The machine rinses itself, stopping automatically.
COFFEE READY
appears on the display. Your IMPRESSA
is ready to use.
When you switch your IMPRESSA off, the spouts with which a coffee
speciality or milk have been prepared are rinsed.
T
Place a receptacle under the coffee spout and the frother.
Q T
Press the on/off button.
MACHINE RINSING
appears on the display, and the
coffee spout is rinsed.
SPOUT RIGHT
/
PRESS RINSE
c T
Press the maintenance button.
MACHINE RINSING
, the right coffee spout is rinsed.
E
When you prepare a milk product, but have not performed
cappuccino cleaning,
CLEAN CAPPUCCINO
appears and
the maintenance button
c
lights up. For ten seconds you can
start the ‘Clean cappuccino frother’ procedure by pressing the
maintenance button
c
.
The IMPRESSA is switched off (standby mode), and the
on/off button
Q
lights up.
E
When your IMPRESSA is switched off, a hissing noise may be
audible. This is normal and does not have any effect on the
machine.
Switching off (standby)
Summary of Contents for IMPRESSA XS90
Page 5: ...5 Important Safeguards...
