18
2 Familiarising yourself with the control options
T
Open the cover of the Rotary Switch.
o T
Press the 1 Coffee button.
1 COFFEE
and the pre-set coffee strength is displayed.
The brewing operation starts and the coffee flows into the
cup.
g T
Turn the Rotary Switch
during
the brewing operation until
1 COFFEE
/
110 ML
is displayed.
The set amount of water flows into the cup. Preparation
stops automatically.
ENJOY
appears on the display.
COFFEE READY
is then displayed.
It is easy to make permanent settings for the amount of water for all
coffee specialities, cappuccino, latte macchiato, a portion of hot
water and portion of milk according to the cup size. As in the follow-
ing example, adjust the amount of water once. Every time you pre-
pare a drink in the future, this amount of water will be dispensed.
Making the permanent settings for the amount of water for the
respective cup size always follows this model.
Example
: To make
permanent
settings for the amount of water for
an espresso, proceed as follows:
Precondition
:
COFFEE READY
is displayed.
T
Place an espresso cup under the coffee spout.
i T
Press and
hold
the 1 Espresso button.
1 ESPRESSO
and the coffee strength is displayed.
i T
Hold
the Espresso button
down
until
ENOUGH COFFEE?
appears.
i T
Release
the 1 Espresso button.
Coffee preparation will start and the espresso will flow into
the cup.
T
Press any button as soon as enough espresso has flowed
into the cup.
Preparation stops automatically.
CONFIRMED w
appears
briefly on the display. The set amount of water for an espres-
so will be permanently stored.
COFFEE READY
is then
displayed.
E
You can alter these settings at any time by repeating the
above procedure.
Entering a permanent
setting for the amount
of water for a cup size
