38
5 Maintenance
When the IMPRESSA is switched off, a rinse operation is automati-
cally initiated.
You can initiate the rinse operation manually at any time.
Precondition
:
COFFEE READY
is displayed.
T
Place a receptacle under the coffee spout.
T
Open the cover of the Rotary Switch.
k T
Keep the Rotary Switch pressed
until
MAINTENANCE
appears.
k T
Press the Rotary Switch to enter the programme item.
CLEAN CAPPUCCINO
f T
Turn the Rotary Switch until
RINSE MACHINE
is dis-
played.
k T
Press the Rotary Switch to initiate the rinse operation.
MACHINE RINSING
Rinsing stops automatically and your IMPRESSA is then once
more ready for use.
E
This chapter applies to the
Professional and Easy Cappuccino
Frothers.
Each time milk has been prepared the IMPRESSA displays a prompt
for Cappuccino rinsing.
It can be set in programming mode whether the rinsing prompt is
displayed
immediately
or
10 minutes
after preparation (refer to
Chapter 4 ‘Permanent settings in programming mode – Rinses’).
Precondition
:
COFFEE READY
/
RINSE CAPPUCCINO
is
displayed and the maintenance button
c
lights up.
T
Place a receptacle under the frother.
E
If you are using the
Professional Cappuccino Frother
, turn
the selection lever to the steam position
n
.
c T
Press the maintenance button.
CAPPU. RINSING
, the frother is rinsed.
The procedure stops automatically.
COFFEE READY
appears on the display.
Rinsing the cappuccino
frother
Rinsing following a prompt
