32
4 Permanent settings in programming mode
g T
Turn the Rotary Switch until
CAPP RINSE AFTER 10’
is displayed.
k T
Press the Rotary Switch to enter the programme item.
CAPP RINSE AFTER 10’
g T
Turn the Rotary Switch until
CAPP RINSE NOW
is
displayed.
k T
Press the Rotary Switch to confirm the setting.
CONFIRMED w
appears briefly on the display.
CAPP RINSE NOW
g T
Turn the Rotary Switch until
EXIT
is displayed.
k T
Press the Rotary Switch to exit the programme item.
RINSES
g T
Turn the Rotary Switch until
EXIT
is displayed.
k T
Press the Rotary Switch to exit programming mode.
COFFEE READY
In the programme item
RESET
you can reset various settings to
their factory settings:
Z
PRODUCT
U
The settings (amount of water, aroma, temperature etc.) for
any product can be reset individually to the factory settings.
The corresponding double product is reset to the factory
settings at the same time.
Z
ALL PROD.
U
The settings (amount of water, aroma, temperature etc.) for
all products are reset to the factory settings.
Z
ALL
U
All customer settings are reset to the factory settings. Your
IMPRESSA then switches off.
Z
EMPT.SYST.
U
The system will be emptied. Your IMPRESSA then switches
off.
Example
: Proceed as follows to reset the values for ‘Espresso’ to the
factory settings.
Precondition
:
COFFEE READY
is displayed.
k T
Keep the Rotary Switch pressed
until
MAINTENANCE
appears.
g T
Turn the Rotary Switch until
RESET
is displayed.
Restore factory set-
tings
