14
12.3 Maintenance
You can activate the following maintenance functions from this
program item:
RINSE MACHINE, CLEAN MACHINE, DE-SCALE MACHINE,
CHANGE FILTER.
“DE-SCALE machine” is not displayed if you are using a CLARIS
plus filter cartridge and the filter is set to “YES”.
“CHANGE FILTER” is not displayed if you are not using a
CLARIS plus filter cartridge and the filter is set to “NO”.
SELECT PRODUCT
Open the programming door (3). Press the Rotary Switch (4)
until you hear an acoustic signal.
FILTER
NO or YES
Turn the Rotary Switch (4) until the following message is dis-
played:
RINSE
Now press the Rotary Switch (4) to start programming.
RINSE
MACHINE
Turn the Rotary Switch (4) until the required maintenance func-
tion (for selection see above) is displayed. Press the Rotary
Switch (4) to activate the function.
The Maintenance menu closes automatically after 5 seconds
if no function is selected.
12.4 Programming the amount of powder for coffee
and espresso
You can adjust the amount of powder for coffee and espresso
separately.
SELECT PRODUCT
Open the programming door (3). Press the Rotary Switch (4)
until you hear an acoustic signal.
FILTER
NO or YES
Turn the Rotary Switch (4) until the following message is dis-
played:
POWDER
QUANTITY
Now press the Rotary Switch (4) to start programming.
SELECT
PRODUCT
Then press a product key of your choice.
NORMAL (example)
–
_ _ _ +
Now turn the Rotary Switch (4) until the required amount of
powder is set.
STRONG (example)
–
_ _ +
Confirm the selected setting by pressing the Rotary Switch (4).
POWDER
QUANTITY
Now turn the Rotary Switch (4) until the following message is
displayed:
EXIT
Now press the Rotary Switch (4) to leave the programming
mode.
SELECT PRODUCT
