13
Dip the milk pipe into the second receptacle containing the
Auto-Cappuccino Cleaner.
Press the Extended Steam draw-off button
.
As soon as the liquid has flown through, press the Extended
Steam draw-off button
again.
Fill the receptacle with fresh water.
Immerse the milk pipe in the receptacle.
Press the Extended Steam draw-off button
.
As soon as the fresh water has flown through, press the Extended
Steam draw-off button
again.
The machine is ready to dispense drinks.
We also recommend regularly disassembling the Frother and
rinsing it under running water.
Remove the Professional Cappuccino Frother from the IM-
PRESSA and take it apart as shown in Fig. 8.
Thoroughly rinse all the parts of the Professional Cappuccino
Frother under running water.
Re-assemble the Professional Cappuccino Frother and attach it
to your IMPRESSA.
11. Switching the IMPRESSA S9/S7 avantgarde off
Switching the IMPRESSA off causes the coffee spout to be rinsed
first. Therefore, please make sure to place a suitable receptacle
under the coffee spout (18).
SELECT PRODUCT
Switch the IMPRESSA off with the ON / OFF key
(11).
MACHINE RINSING
The coffee spout (18) is rinsed.
12. Programming
The IMPRESSA leaves the factory with a number of default
settings that allow you to make coffee without having to pro-
gram the machine first. You can, however, adjust various
parameters to make the coffee suit your personal taste.
The following parameters can be adjusted:
Filter
Water hardness
Rinse
Powder quantity
Water quantity
Temperature
Water portion
Steam portion
Economy mode
Time
Automatic switch-on time
Automatic switch-off time
Language
Display
Information (to be viewed only)
12.1 Programming the filter
Please refer to Chapter 5 “Using the CLARIS plus filter cartridge”.
12.2 Programming your machine to the correct
water hardness (only with FILTER NO)
Please refer to Chapter 4 “Adjusting your machine to the water
hardness”.
E
