37
5 Permanent settings in programming mode
Example
: Proceed as follows to change the energy saving mode
from
SAVE -
to
SAVE w
.
k T
Keep the Rotary Switch pressed
until
RINSE
appears.
g T
Turn the Rotary Switch until
ENERGY -
is displayed.
k T
Press the Rotary Switch to enter the programme item.
SAVE -
g T
Turn the Rotary Switch until
SAVE w
is displayed.
k T
Press the Rotary Switch to confirm the setting.
OK
appears briefly on the display.
ENERGY w
g T
Turn the Rotary Switch until
EXIT
is displayed.
k T
Press the Rotary Switch to exit programming mode.
READY
By instructing your IMPRESSA to automatically switch itself off, you
can cut down your energy consumption. If this function is activated,
your IMPRESSA switches off automatically after the pre-set time fol-
lowing the last action on the machine.
You can set the automatic switch-off to 15 minutes, 0.5 hours
up to 15 hours, or inactive.
Example
: Proceed as follows to change the automatic switch-off
from
1 HRS
to
15 MIN
.
k T
Keep the Rotary Switch pressed
until
RINSE
appears.
g T
Turn the Rotary Switch until
OFF AFTER
is displayed.
k T
Press the Rotary Switch to enter the programme item.
1 HRS
f T
Turn the Rotary Switch until
15 MIN
is displayed.
k T
Press the Rotary Switch to confirm the setting.
OK
appears briefly on the display.
OFF AFTER
g T
Turn the Rotary Switch until
EXIT
is displayed.
k T
Press the Rotary Switch to exit programming mode.
READY
E
Automatic switch-off
Automatic switch-off
