46
6 Maintenance
The cleaning operation is now complete. The IMPRESSA is
once more ready for use.
You can initiate the ‘Cleaning the machine’ operation manually.
Precondition
:
READY
is displayed.
k T
Keep the Rotary Switch pressed
until
RINSE
appears.
k T
Press the Rotary Switch to enter the programme item.
RINSE
g T
Turn the Rotary Switch until
CLEAN
is displayed.
k T
Press the Rotary Switch.
EMPTY TRAY
Continue with the
second
prompt to take action (indicated
by a
T
), as is described under ‘
Cleaning after a prompt’
.
The IMPRESSA builds up deposits of limescale over time and auto-
matically prompts you to descale it when necessary. The degree of
calcification depends on the degree of hardness of your water.
If the descaling agent comes into contact with the skin or eyes, this
can cause irritation.
Avoid contact with the skin or eyes.
If descaling agent does come into contact with the skin or
eyes, rinse off with clean water. Should you get any descaling
agent in your eye, see a doctor.
If the wrong descaling agent is used, the machine could be dam-
aged and/or traces of detergent could be left behind in the water.
Use only original JURA maintenance products.
If the descaling operation is interrupted, there may be damage to
the machine.
Allow the descaling programme to run to the end.
If the descaling agent comes into contact with sensitive surfaces,
damage cannot be ruled out.
Clean up any splashes immediately.
T
T
T
T
T
T
Manual cleaning
Manual cleaning
Descaling the machine
Descaling the machine
CAUTION
CAUTION
CAUTION
CAUTION
CAUTION
CAUTION
CAUTION
CAUTION
