43
6 Maintenance
Precondition
:
READY
is displayed.
Place a receptacle under the coffee spout.
k T
Keep the Rotary Switch pressed
until
RINSE
appears.
k T
Press the Rotary Switch to enter the programme item.
RINSE
k T
Press the Rotary Switch to initiate the rinse operation.
RINSING
, water flows out of the coffee spout.
Rinsing stops automatically and your IMPRESSA is then
ready for use.
After 50 litres of water have flowed through, the filter will
cease to work. Your IMPRESSA will automatically prompt you
to change the filter.
After two months, the filter will cease to work. You can check
the elapsed time by referring to the date plate on the cartridge
holder in the water tank.
If the CLARIS Blue filter cartridge is not activated, you will not
be prompted to change the filter.
You can also try out the ‘changing the filter’ operation online.
Visit the Knowledge Builder at www.jura.com.
Proceed as follows to change the CLARIS Blue filter cartridge when
prompted to do so by your IMPRESSA.
Precondition
:
READY
/
FILTER
is displayed and the mainte-
nance button
c
lights up.
c T
Press the maintenance button.
CHANGE
Remove and empty the water tank.
Lift the cartridge holder.
Take out the old filter cartridge and the extension.
Fit the extension on top of a new filter cartridge.
T
E
E
E
@
T
T
T
T
Changing the filter
Changing the filter
Changing after a prompt
Changing after a prompt
