10
IMPRESSA C50 – Quick Reference Guide
T
Carefully remove the fine foam frother from the Connector
System
©
by twisting slightly.
T
Place a receptacle (at least 500 ml) under the Connector Sys-
tem
©
.
h
T
Turn the switch to the
m
position.
DESCALE
, water flows out of the Connector System
©
sev-
eral times. The Maintenance symbol
c
flashes during the
descaling operation.
The operation is interrupted,
SWITCH CLOSE
.
j
T
Turn the switch to the
o
position.
DESCALE
, the descaling operation is continued.
The operation is interrupted,
EMPTY TRAY
.
T
Empty the drip tray and coffee grounds container and put
them back into the machine.
FILL TANK
T
Empty the receptacle and place it back under the Connector
System
©
.
T
Place another receptacle under the coffee spout.
T
Remove the water tank and rinse it thoroughly.
T
Fill the water tank with fresh, cold water and reinsert the
tank.
SWITCH OPEN
, the light segment on the switch lights up.
h
T
Turn the switch to the
m
position.
DESCALE
, the descaling operation is continued.
The operation is interrupted,
SWITCH CLOSE
.
j
T
Turn the switch to the
o
position.
DESCALE
, the descaling operation is continued.
The operation is interrupted,
DESCALE
.
Water flows out of the coffee spout.
EMPTY TRAY
T
Re-assemble the fine foam frother.
T
Empty the drip tray and coffee grounds container and put
them back into the machine.
ESPRESSO
appears on the display (example). Descaling is
now complete. Your IMPRESSA is once more ready for use.
E
If the descaling operation stops unexpectedly, rinse the water
tank thoroughly.
C50_Kurz/en/201211
Downloaded from
