6
IMPRESSA C50 – Quick Reference Guide
T
Insert the CLARIS Blue filter cartridge into the water tank,
exerting slight pressure.
T
Close the filter holder. It will click into place audibly.
E
After two months, the filter will cease to work. Set the date on
the date plate on the filter holder in the water tank.
T
Fill the water tank with fresh, cold water and reinsert the
tank.
T
Place a receptacle (at least 500 ml) under the fine foam
frother.
c
T
Touch the Maintenance symbol.
SWITCH OPEN
, the light segment on the switch lights up.
h
T
Turn the switch to the
m
position.
FILTER RINSING
, water flows out of the fine foam
frother.
E
You can interrupt rinsing of the filter at any time. To do this,
turn the switch clockwise. Turn the switch anticlockwise to
continue rinsing the filter.
E
The water may be slightly discoloured. This is not harmful to
health and does not affect the taste.
Rinsing of the filter stops automatically after approximately
500 ml.
SWITCH CLOSE
appears on the display.
j
T
Turn the switch to the
o
position.
HEATING
, the machine heats up.
ESPRESSO
appears on the display (example). The filter is
now activated.
E
After 50 litres of water have flowed through, the filter will
cease to work. Your IMPRESSA will automatically prompt you
to change the filter.
E
After two months, the filter will cease to work. Set the date on
the date plate on the filter holder in the water tank.
E
If the CLARIS Blue filter cartridge is not activated in program-
ming mode, you will not be prompted to change the filter.
E
CLARIS filter cartridges are available from specialised dealers.
Changing the filter
Downloaded from
