4
IMPRESSA C50 – Quick Reference Guide
h
T
Turn the switch to the
m
position.
STEAM
, the fine foam frother and the milk pipe are rinsed
with fresh water.
j
T
As soon as the receptacle containing the fresh water is
empty, turn the switch to the
o
position.
STEAM
/
READY
The cleaning of the fine foam frother is now complete.
To make sure the fine foam frother works properly, and in the inter-
ests of hygiene, it must be dismantled and rinsed
daily
if you have
been preparing milk. Your IMPRESSA will not prompt you to disman-
tle and rinse the frother.
T
Remove the milk pipe and rinse it thoroughly under running
water.
T
Carefully remove the fine foam frother from the Connector
System
©
by twisting slightly.
T
Dismantle the fine foam frother into its individual parts.
T
Rinse all the parts of the fine foam frother thoroughly under
running water. If there are severely dried-on milk residues,
firstly immerse the individual parts in JURA Cappuccino
Cleaner and then rinse them thoroughly.
T
Re-assemble the fine foam frother.
E
Ensure that all individual parts are correctly and firmly con-
nected to ensure optimum operation.
T
Firmly attach the fine foam frother to the Connector Sys-
tem
©
.
To make sure the professional fine foam frother works properly, and
in the interests of hygiene, it must be dismantled and rinsed
daily
if
you have been preparing milk. Your IMPRESSA will not prompt you
to dismantle and rinse the frother.
T
Remove the milk pipe and rinse it thoroughly under running
water.
T
Carefully remove the professional fine foam frother from the
Connector System
©
by twisting slightly.
Dismantling and rinsing
the fine foam frother
Dismantling and rinsing
the professional fine
foam frother
Downloaded from
