30
4 Permanent settings in programming mode
O
T
Press the P button to exit programming mode.
‘Please select product:’
In the programme item
‘Machine settings (3/5)’
/
‘Maintenance set-
tings’
you can make the following settings:
U
‘Filter’
U
Activate the CLARIS Pro Blue filter cartridge (see Chapter 5
‘Maintenance – Inserting and activating the filter’).
U
‘Water hardness’
U
If you do not have a filter cartridge, you will need to set the
water hardness (see Chapter 4 ‘Permanent settings in pro-
gramming mode – Setting the water hardness’).
U
‘Switch-on rinse’
/
‘Manual’
U
The switch-on rinse must be started manually.
U
‘Switch-on rinse’
/
‘Automatic’
U
The switch-on rinse is started automatically.
U
‘Rinse the milk system’
/
‘Manual after 10 min.’
U
You are prompted to rinse the milk system 10 minutes after
preparation of a speciality coffee with milk.
U
‘Rinse the milk system’
/
‘Manual immediate’
U
You are prompted to rinse the milk system immediately
after preparation of a speciality coffee with milk.
U
‘Rinse the milk system’
/
‘Automatic after 10 min.’
U
Milk system rinsing is automatically initiated 10 minutes
after preparation of a speciality coffee with milk.
U
‘Rinse the milk system’
/
‘Automatic immediate’
U
Milk system rinsing is automatically initiated approx. 30 sec-
onds after preparation of a speciality coffee with milk.
Example:
Proceed as follows to make the machine prompt you to
rinse the milk system
immediately
after preparing a speciality cof-
fee with milk.
Precondition:
‘Please select product:’
is displayed.
O
T
Press the P button.
‘Maintenance status (1/5)’
g
T
Turn the Rotary Switch until the programme item
‘Machine
settings (3/5)’
is displayed.
Maintenance settings
Downloaded from
