19
2 Preparation
Example:
Proceed as follows to prepare one coffee using ground
coffee.
Precondition:
‘Please select product:’
is displayed.
T
Place a cup under the dual spout.
T
Open the cover of the filler funnel for ground coffee.
‘Please add ground coffee.’
T
Place one level measuring spoon of ground coffee into the
filler funnel.
T
Close the cover of the filler funnel.
‘Please select product:’
, the speciality coffees you can pre-
pare with ground coffee are displayed.
T
Press the
‘Coffee’
button.
Preparation starts.
‘Coffee’
and the fill volume are displayed.
The preset amount of water for coffee flows into the cup.
Preparation stops automatically.
‘Please select product:’
appears on the display.
It is easy to make permanent settings for the amounts (amount of
water, amount of milk etc.) according to the cup size for all products
except caffè latte. Adjust the amount once as shown in the following
example. Every time you prepare a drink in the future, this amount
will be dispensed.
The permanent settings for adapting the amounts to the cup size
for all products follow this model.
Example:
Proceed as follows to
permanently
set the amount of
water for one coffee.
Precondition:
‘Please select product:’
is displayed.
T
Place a cup under the dual spout.
T
Press and
hold
the
‘Coffee’
button.
‘Coffee’
and the fill volume are displayed.
T
Hold
the
‘Coffee’
button down until
‘Enough coffee? Press
button.’
appears.
T
Release the
‘Coffee’
button.
Preparation starts and the coffee flows into the cup.
T
Press any button as soon as there is sufficient coffee in the
cup.
Permanently setting
amounts for the cup size
Downloaded from
