26
4 Permanent settings in programming mode
4 Permanent settings in programming mode
Press the P button to enter programming mode. You can navigate
through the programme items and permanently save the required
settings simply by turning the Rotary Switch and using the multi-
function buttons. The following settings can be made:
Programme item
Sub-item
Explanation
‘Maintenance status (1/5)’ ‘Clean’
,
‘Change the filter’
(only if
filter is activated),
‘Descale’
,
‘Rinse the milk system’
,
‘Rinse the coffee system’
,
‘Clean the milk system’
T
Start
the required maintenance
programme here.
‘Product settings (2/5)’
‘Expert mode’
,
‘Set consistency of grind’
T
Select your settings for speciality
coffees, milk and hot water.
T
Adjust the consistency of grind for both
grinders to the coffee beans used.
‘Machine settings (3/5)’
‘Maintenance settings’
(filter, water hardness,
switch-on rinse, milk
system rinsing),
‘Time / date’
,
‘Timer’
,
‘Save energy’
,
‘Units’
,
‘Factory setting’
T
Set the water hardness or activate the
filter.
T
Change the settings for the switch-on
rinse and milk system rinse.
T
Set the time after which the GIGA
should switch off automatically.
T
Select an energy-saving mode.
T
Select the unit for the amount of water.
T
Reset the machine or the permanently
set values of all products to the factory
settings.
‘Machine settings (4/5)’
‘Choose language’
,
‘Display’
,
‘Colour scheme’
,
‘Café à la carte’
,
‘Prepare two products at
once’
T
Select your language.
T
Change the display settings.
T
Activate the grinder selection.
T
Specify whether to allow simultaneous
preparation of a speciality coffee and
‘Steam’
or
‘Hot water’
.
Possible settings in
programming mode
Downloaded from
