28
4 Permanent settings in programming mode
Product
Coffee strength
Amount
More settings
Two cappuccini,
two caffè latte,
two espressi
macchiati,
two latte macchiati
–
Water: 0.5 oz – 8.0 oz
(25 ml – 240 ml)
Milk: 0 sec. – 120 sec.
Milk foam:
0 sec. – 120 sec.
(per cup)
Temperature (low,
normal, high),
grinder on the left and/or
right (as %)
Portion of milk
foam,
portion of milk
–
Milk: 0 sec. – 120 sec.
Milk foam:
0 sec. – 120 sec.
–
Two portions of milk
foam,
two portions of milk
–
Milk: 0 sec. – 120 sec.
Milk foam:
0 sec. – 120 sec.
(per cup)
–
Hot water
–
Water: 0.5 oz – 15.0 oz
(25 ml – 450 ml)
Temperature (low,
normal, high)
E
In addition to the settings listed, you can
reset the values for
all products to the factory settings.
Example:
Proceed as follows in the
‘Expert mode’
to change the
amount of milk for a latte macchiato from
‘4 sec.’
to
‘6 sec.’
, the
amount of milk foam from
‘12 sec.’
to
‘14 sec.’
and the amount of
water from
‘1.5 oz’
(45 ml) to
‘1.0 oz’
(40 ml).
Precondition:
‘Please select product:’
is displayed.
O
T
Press the P button.
‘Maintenance status (1/5)’
g
T
Turn the Rotary Switch until the program item
‘Product set-
tings (2/5)’
is displayed.
T
Press the
‘Expert mode’
button.
‘Expert mode’
E
Next select the button of the product for which you would like
to make settings. No product is prepared at this point.
E
You can also select the products in the product selector. To do
this, turn the Rotary Switch to view the product selector.
T
Press the
‘Latte macchiato’
button.
T
Press the
‘Amount of milk’
button.
