Jura GIGA 5 Instructions For Use Manual Download Page 14

Page: 14 / 64

1 Preparing and using for the first time

Empty the drip tray and coffee grounds container and put

them back into the machine.

‘Filter’

‘Filter rinsing complete.’

‘Welcome to JURA’

‘Machine is heating.’

‘Press the Rotary

Switch.’

Press the Rotary Switch.

‘Machine is rinsing.’

, the machine rinses. The operation

stops automatically.

‘Please select product:’

appears on the

display. Your GIGA is ready for use.

Press the

‘Inactive’

button.

Press the

‘Save’

button.

‘Press the Rotary Switch.’

, the Rotary Switch lights up.

Place a receptacle under the dual spout.

Press the Rotary Switch.

‘System is filling.’

, the system fills up with water. The opera-

tion stops automatically.

‘Water hardness’

If you do not know the hardness of your water, you must find
this out first (see Chapter 1 ‘Preparing and using for the first
time – Determining the water hardness’).

Press the

‘+’

‘–’

button to set the water hardness.

Press the

‘Save’

button.

‘Saved’

appears briefly on the display.

‘Welcome to JURA’

‘Machine is heating.’

‘Press the Rotary

Switch.’

Place a receptacle under the dual spout.

Press the Rotary Switch.

‘Machine is rinsing.’

, the machine rinses. The operation

stops automatically.

‘Please select product:’

appears on the

display. Your GIGA is ready for use.

Deactivating the filter

Summary of Contents for GIGA 5

































































Search results

Summary of Contents for GIGA 5

Reviews:

Related manuals for GIGA 5

Brands by name

Popular brands

Jura GIGA 5, Instructions For Use Manual

Search results

Summary of Contents for GIGA 5

Reviews:

Related manuals for GIGA 5

Brands by name

Popular brands