6 Permanent settings in programming mode
47
nl
de
es
en
pt
fr
ru
it
6 Permanent settings in programming mode
In programming mode you can set the switch-off time and water
hardness� Press the
f
button to enter programming mode� Press
the
f
button again to exit this mode�
E
You can use the JURA app (J�O�E�
®
) to select in what fill range
the Pulse Extraction Process P�E�P�
®
and intelligent preheating
are enabled (Intelligent Assistant)�
By instructing your ENA to automatically switch itself off, you can
cut down your energy consumption� If this function is activated,
your ENA switches off automatically after the preset time following
the last action on the machine�
E
If no action is performed on the ENA for 5 minutes, the
symbol display goes dark� However, the ENA remains ready
for use�
The number of symbols that are brightly lit up indicates the acti-
vated switch-off time:
Switch-off time
Symbol(s) shown in display
30 minutes
s
1 hour
ss
2 hours
sss
4 hours
sss
£
Example:
Proceed as follows to change the switch-off time from
30 minutes to 1 hour�
T
Press the
f
button�
The
&
symbol lights up brightly�
T
Press the
o
button several times until the
ü
symbol lights up
brightly�
T
Press the
s
button to enter the programme item�
T
Press the
i
/
o
button to change the setting for the switch-off
time�
Press the
s
button to confirm the setting�
E
The setting must be confirmed within 20 seconds�
The
sss£
symbols flash 3 times in quick succession�
E
The automatic switch-off can also be set using the JURA app
(J�O�E�
®
)�
Automatic switch-off
