4 Preparation
44
It is easy to make permanent settings for the amount of water for all
speciality coffees according to the cup size� Adjust the amount once
as shown in the following example� Every time you prepare a drink
in the future, this amount of water will be dispensed�
The process for permanently adapting the amount of water to the
cup size is the same for all speciality coffees�
Example:
Proceed as follows to
permanently
set the amount of
water for one coffee�
T
Place a cup under the coffee spout�
T
Press the
o
button for
about 2 seconds.
The coffee flows into the cup�
T
Press any button as soon as there is sufficient coffee in the cup�
Preparation stops� The set amount of water for one coffee is
permanently stored�
E
You can alter this setting at any time by repeating the above
procedure�
You can adjust the grinder to suit the degree of roast of your coffee�
If you adjust the consistency of grind when the grinder is not
operating, the grinding wheel could be damaged�
T
Only adjust the consistency of grind when the grinder is
running�
E
The consistency of grind is correct if the coffee flows
regularly from the coffee spout� In addition a fine, thick
crema forms�
Grinding wheel
U
1:
Coarse
consistency of grind setting
U
2:
Fine
consistency of grind setting
Example:
Proceed as follows to change the consistency of grind
during
the preparation of an espresso�
T
Place a cup under the coffee spout�
T
Press the
i
button�
T
Turn the grinder adjustment wheel to the desired position
while
the grinder is running�
The preset amount of water flows into the cup�
Permanently setting the
amount of water for the cup
size
Adjusting the grinder
CAUTION
1
2
