CLEAN
(chapter 16.1); manual tablet cleaning
C-RINSE
(chapter 10g); manual cappuccino rinsing.
RINSE
(see example below in chapter 15.1).
DE-SCALE MACHINE
(chapter 17.1).
If you push the Rotary Dial to enter one of the above programs,
the display guides you through the necessary steps.
Please note:
If the display shows
RINSE
and you do not select
one of the above programs within five seconds, the C9 OT will
return to
READY
.
Example
:
Run a manual hot water rinse cycle.
READY
.
• Push the Rotary Dial until the display shows
RINSE
.
• Push the Dial again,
C-CLEANING
.
• Turn the Dial until the display shows
RINSE
.
• Place a cup under the Dual Coffee Spouts.
• Push the Rotary Dial. The C9 OT will push hot water through
the Dual Coffee Spouts and then return to
READY
.
15.2 C CLEANING (Cappuccino Cleaning)
This message appears when turning the machine off and you
have used the Cappuccino or Milk button. The Rinse button
illuminates. If you push the Rinse button, the machine starts the
Cappuccino Cleaning program. See steps 2 through 9 below.
You can also access this program at any time as follows:
1.
READY
. Push the Rotary Dial until the display shows
RINSE
.
2. Push the Dial again,
C-CLEANING
.
3. Push the Dial again,
CAPPUCCINO CLEANER
.
4. Pour approx. 8 oz. of fresh water into a container and
immerse the long hose from the frothXpress.
5. Add one capful (15 ml /1/2oz. ) of the cappuccino cleaner
liquid and place another container under the frothXpress and
make sure the frothXpress dial points to 12 o’clock (Fig. 19).
6. Push the Rinse button.
CLEANING
. The C9 OT siphons the
cleaning liquid through the system. And stops automatically
WATER FOR CAPPUCCINO
.
7. Empty both containers and fill one with fresh water and
immerse the hose. Place the other one under the frothXpress.
8. Push the Rinse button.
CLEANING
. The process stops
automatically.
READY
.
9. Squeeze the bottom of the venting tip (Fig. 12) to make sure
it is clean.
Please note:
You can also immerse the frothXpress parts (except
the chrome plated face) into a cappuccino cleaner solution as
follows:
• Remove the frothXpress from the steam nozzle.
• Take the frothXpress apart (Fig. 12) and set the chrome
face plate aside.
• Place all other parts including the hose in a cup with
warm water and add one capful (15 ml or 1/2oz.) of the
cappuccino liquid.
• Let sit for ten minutes or overnight.
• Rinse all parts under fresh water and assemble.
Please note:
To re-order the cappuccino cleaner see chapter 20.
15.3 GENERAL CLEANING INSTRUCTIONS
Never use abrasive materials or chemicals to clean the
outside of the machine.
• Clean the housing with a soft, damp cloth.
• Rinse water tank daily and fill with fresh cold water.
26.
