10e. PREPARING HOT MILK / HOT CHOCOLATE
The Cappuccino System can produce hot milk or hot chocolate
without brewing coffee.
READY
.
• Connect the milk container to the frothXpress system or use
the long flexible hose inserted into any milk container (Fig. 19).
• Place your cup underneath the Cappuccino system.
• Push the Milk button (Fig. 4). The display shows
HEATING
.
• When the display shows
READY
, push the Milk button again.
MILK
. During this time hot steamed / frothed milk is created
and delivered into your cup. The flow stops after 30 seconds
(factory setting, chapter 5). It can be stopped anytime by
pushing the milk button again
READY
.
10f. OVERRIDING THE CAPPUCCINO AND MILK SETTINGS
As with the coffee buttons you can override the pre-programmed
volumes of the milk beverage buttons.
Example
: The factory setting for the Cappuccino button is
normal strength, 14 seconds of milk frothing and 2 oz. of coffee.
Prepare a one-time special cappuccino,
STRONG
, more milk
froth (20 seconds) and 3.5 oz. of coffee.
READY
• Place your cappuccino cup under the Cappuccino system and
open the cover for the Rotary Dial.
• Turn the Rotary Dial (Fig. 3.8) until the display shows
STRONG
.
• Push the Cappuccino Button (Fig. 4).
• When the frothing starts, turn the Rotary Dial until the display
shows
20 SEC
.
• When the coffee brewing starts, turn the Rotary Dial until the
display shows
3.5 OZ
.
When completed
READY
.
If you use the cappuccino button again and do not use the
Rotary Dial, the C9 OT will brew a cup according to the
programmed settings for this button.
For re-programming see chapter 11 (cup sizes) and chapter 14.1
for cup sizes, temperature and strength.
10g. CAPPUCCINO RINSING
In only a few seconds this rinsing program removes milk droplets
inside the frothXpress.
10 minutes after preparing a beverage with milk (Cappuccino
Button, Milk Button) the C9 OT display shows
READY / RINSE
CAPPUCCINO
and the Rinse button illuminates. You can still
continue making beverages. We recommend to perform the
cappuccino rinsing.
• Turn the frothXpress dial to the 3 o’clock position (Fig. 13) and
place a cup underneath the Cappuccino System.
• Push the Rinse button. The display shows
CAPPUCCINO
RINSING.
Hot water is pushed through the frothXpress for a
few seconds.
READY
.
• Turn the frothXpress dial back to your preferred position.
IMPORTANT
: If you do not use the Cappuccino Rinsing cycle,
milk droplets might harden inside the frothXpress, resulting in
insufficient frothing performance.
10h. USING HOT WATER
The hot water function lets you pre-warm cups, brew tea, make
a quick cup of soup, or add hot water to your coffee or espresso
to create a milder flavor.
READY
.
• Place a cup under the Cappuccino system (Fig. 18).
• Push the Hot Water button (Fig. 4)
WATER
.
18.
