8
9
1:
Lift the quick-release lock from
the handlebar holder and remove
the lower screw.
1:
Loosen the seat post clamp and
insert saddle post.
2:
Set aside the nut and gasket but
leave screw in place.
2:
Adjust saddle to the preferred
height then tighten clamp.
4:
Adjust handlebar angle and
position to your preference. Then re-
install the nut and gasket to tighten.
3:
For safety precautions, make sure
the seat post clamp is somewhere
between the “Limit Screw” and the
“Max Height Line”.
3:
Place the handle bar inside
the holder, then close the holder
allowing the screw to come through
the bottom hole.
4:
To secure the saddle, tighten the
seat post clamp as pictured, then
press the seat downward firmly to
ensure it stays in place.
Summary of Contents for Discovery
Page 1: ...USER MANUAL ...
