10
11
Battery & charger care:
•
To help maintain the life of your battery, Do not charge in extreme hot or cold
temperatures. The suitable range for charging is between 0°
-
45°C / 32°
-
113°F
•
always
keep the battery away from acid, alkaline, water, & fire.
•
always
use the original provided charger to charge your bike.
•
never
exceed a charging time of 6 hours, or a current of more than 2A.
•
never
mis-connect the positive and negative power supply.
•
never
damage, disassemble, or short circuit the battery.
•
always
plug the battery in first, then connect the power source when charging.
•
always
unplug the power source first then the battery after charging.
•
never
leave the charger plugged into the bike or power source when not charging.
•
If the charger indicator stops working or the charger over heats and emits a funny smell,
unplug the charger immediately and replace or repair the charger.
•
never
penetrate the charger or get it wet. Avoid bringing the charger on rides to reduce
the risk of damage or weather reaching your charger.
•
Avoid letting your battery being fully discharged while using your bike.
•
never
disassemble or replace any parts of the charger by yourself.
•
Do not put the battery in places that may fall, causing battery leakage.
•
If the battery will not be used in a long time, store the battery in a dry, cool environment
and charge it for 2 hours every two months.
•
Charging your battery in any way otherwise stated by this manual will void the warranty.
option 2:
Remove
battery (see below)
and plug charger in
directly.
3:
Reverse the
procedure to re-install
the battery.
2:
Fold pedal back up by
pressing inward & upward.
option 1:
Uncover
silicon lid and insert
charger to charge from
the bike frame port.
2:
With bike folded, turn
battery lock, then slide
battery out from frame.
1:
Lower pedal into place
1:
Unfold frame by
pressing the latch lock
and pulling the frame
latch away from frame.
Be sure to charge the battery
before your first ride!
or
Summary of Contents for Discovery
Page 1: ...USER MANUAL ...
