JA98-001 Remote Mount Audio Controller
Installation and Operating Manual
Rev A
Page 2
1.3
Inputs and Outputs
Refer to the JA98-001
connector maps
for the mating connector designators and pin assignments for the
input and output signals.
1.3.1
Inputs
Name
Qty Type
ALERT ENABLE
1
Active high discrete
ALERT KEY
2
Active low discrete (selected via ProCS)
CALL
1
Active low discrete (selected via ProCS)
CONFIG DATA TO JA98
1
Data signal
CONTROL DATA TO JA98
1
Data signal
DIGITAL TIE IN +/-
1
Reserved; not implemented
DIRECT AUDIO
2
Audio signal (one selected via ProCS)
MIC
7
Audio signal
MODE SELECT / CONFIG AUDIO
1
Multi format signal
MUSIC
2
Audio signal
NORM MODE SELECT
1
Active low discrete
ICS PTT
3
Active low discrete (selected via ProCS)
TX PTT
3
Active low discrete
POWER INPUT
1
14 to 28 Vdc power supply
RX
11
Audio signal (6 COM, 5 NAV)
1.3.2
Outputs
Name
Qty
Type
CVR HI/LO
1
Audio signal
CONFIG DATA FROM JA98
1
Data signal
CONTROL DATA FROM JA98
1
Data signal
DIGITAL TIE OUT +/-
1
Reserved; not implemented
PHN
7
Audio signal (6 outputs for driving 7 phones.)
MIC
6
Audio signal (transceiver Mic)
PTT
6
Active low discrete
RX COMP OUT
1
Audio signal (selected via ProCS)
TIME OUT RESET
1
Active low discrete
TX ACTIVE
1
Active low discrete
1.3.3
Bi-directional Ports
Name
Qty
Type
ICS TIE HI/LO
1
Audio signal
