JA98-001 Remote Mount Audio Controller
Installation and Operating Manual
Rev A
Page 12
2.5.2.6
JA98-001
Connector Pin Configuration
Several of the connector pins can be configured to meet the requirements of specific installations. Refer to JA98-001
Interconnect sheet 5 of 5
.
2.5.2.7
JA98-001
Alerts
The JA98-001 has standard audio signals for each of the two alerts, and the audio files window allows these signals
to be customized with other recordings during the configuration process.
Warning
: The internal audio alerts are intended only to supplement,
not
replace, airframe alerts such
as ‘low rotor RPM’, ‘engine out’ or ‘decision height alerting’. The alert audio feature is intended for use
as a secondary alerting system where another device provides the primary annunciation.
Several of theJ1 and J2 connector pins can
be configured to suit individual installations.
The default settings are
bolded
.
Clicking on 'Open…' allows browsing access for selection of a suitable .wav file.
If a file is selected, a 'Play' button will appear to the right of the selected file.
The default Alert signals loaded into the unit at the factory are:
JA98-001 Wav File (Sine 300Hz 10 sec) Rev A.WAV
JA98-001 Wav File (Sine 1000Hz 10 sec) Rev A.WAV
