JUPITER AVIONICS TEMPLATE AUTOCAD PORTRAIT SIZEA REV B.DWT
TITLE
APPROVED
PREPARED
CHECKED
L00N3
NCAGE CODE
PART NO.
SHEET
DOC NO.
CONFIDENTIAL & PROPRIETARY
TO JUPITER AVIONICS CORP.
Remote Mount Audio Controller
Interconnect Notes
JA98-001
1/5
JA98-001 Interconnect Rev A.dwg
TAT
JA98-001 INTERCONNECT WIRING NOTES
NOTES
ALL WIRE SIZE SHOULD BE 24 AWG MIN UNLESS OTHERWISE SPECIFIED. UNSHIELDED WIRE
SHOULD BE SELECTED PER FAA AC43.13-1B CHANGE 1 PARA 11-76 TO 11-78. WIRE TYPES
SHOULD BE IN ACCORDANCE WITH MIL-W-22759 AS DESCRIBED IN FAA AC43.13-1B CHANGE 1
PARA 11-85 AND 11-86 AND LISTED IN TABLE 11-11 OR 11-12. ALL SHIELDED CABLE SHOULD BE IN
ACCORDANCE WITH MIL-DTL-27500 (REVISION H OR LATER).
CONNECTION TO AIRFRAME GROUND SHOULD BE MADE WITH 20 AWG WIRE. LENGTH NOT TO
EXCEED 3 FT (0.91 M).
CABLE SHIELDS AT THE JA98-001 CONNECTOR PINS SHOULD BE TERMINATED TO AIRFRAME
GROUND USING A TAG RING P/N: MS27741-5 OR EQUIVALENT.
CONNECTOR PIN HAS MORE THAN ONE FUNCTION. SEE THE OPTIONS SECTION OF THIS
DRAWING FOR ALTERNATE INTERCONNECT WIRING.
NORM MODE SELECT MUST BE GROUNDED FOR NORMAL OPERATION. REMOVE GROUND FOR
EMERGENCY OPERATION.
TIME OUT RESET PIN OUTPUTS A GROUND WHEN CONTROL DATA IS NOT RECEIVED FROM THE
CONTROL HEAD AFTER A SPECIFIED TIME. OUTPUT IS OPEN COLLECTOR.
TX ACTIVE PIN OUTPUTS A GROUND WHEN ANY USER TX PTT IS ACTIVE. OUTPUT IS
OPEN COLLECTOR.
2
1.
3
4
CONNECTOR PIN LEGENDS
LEGEND
SPARE
INTERNAL CIRCUITS MAY EXIST AND MAY BE ACTIVATED FOR FUTURE USE. NO EXTERNAL
WIRE CONNECTION.
N/C
NO CONNECTION
5
6
7
JAC
SRM
02-06-14
JAC
KDV
02-06-14
