Jupiter Avionics JA95-N02, Installation And Operating Manual

Page: 8 / 44

JA95-N02 Audio Controller - Six Transceiver - NVG
Installation and Operating Manual
Rev B Page 4
Music Audio input Impedance 1000
Ω ±
10%
Intercom Tie Line Audio input Impedance 2000
Ω ±
10%
Output Load
Phone load 600
Ω ±
10%
Transceiver Microphone load 150
Ω ±
10%
CVR load 5000
Ω ±
10%
Receive Composite Audio load 600
Ω ±
10%
Intercom Tie Line type 1 rated load 2000
Ω ±
10%
Intercom Tie Line type 2 rated load 2000
Ω ±
10%
Intercom Tie Line type 1 maximum load 666
Ω
max (3 loads)
Intercom Tie Line type 2 maximum load 285
Ω
max (7 loads)
Volume Controls
Receive Audio control variation 32
±
3dB
ICS Audio control variation 42
±
3dB
Input to output Crosstalk and Bleed-through Level
Input to Output crosstalk
≤55 dB
Input to Input Crosstalk Level
1
Input to Input crosstalk
≤
60 dB
Audio Noise Level without Signal
Noise level below the rated output
≥
60 dB
1.4.1.2 Audio Performance, Other
CVR HI / LO output circuitry type (Normal) differential
CVR HI / LO output circuitry type (Emergency) single ended
Microphone inputs designed for MIC type amplified dynamic
Microphone inputs circuitry type single ended
MUSIC LEFT / RIGHT HI / LO audio input circuitry type differential
FRONT MUSIC LEFT / RIGHT audio input circuitry type: single ended
RECEIVE AUDIO input circuitry type differential
PHN HI / LO output circuitry type single ended
MIC output circuitry type differential
RX Composite Audio output circuitry type differential
ICS TIE HI / LO Circuitry Type differential
DIRECT AUDIO 2 HI to PILOT PHN HI connection 100
Ω
1.4.1.3 Discrete Signals
Active low control output, active, current
≤
1 Adc
1.4.1.4 Lights Input
LIGHTS INPUT ranges 0 to 28, 0 to 14 and 0 to 5 Vdc
LIGHTS INPUT current 10 mA max.
1
Input to DIR AUDIO 2 crosstalk is not applicable