Jupiter Avionics JA95-N02, Installation And Operating Manual

Page: 15 / 44

JA95-N02 Audio Controller - Six Transceiver - NVG
Installation and Operating Manual
Rev B Page 11
2.5.3.4 Transmit Levels
When the Transmit Timeout check box is checked the transmit time-out is
enabled (
Default not checked)
When the FM2 Duplex check box is checked the COM5 (FM2) radio is set to
duplex operation (
Default not checked) (see section 3.3.4 )
2.5.3.5 Sidetone Levels
2.5.3.6 Connector Pin Configuration
Multi-Function Switch
The front panel multi-function switch is a green two-position momentary centre-off switch. Its default configuration
is as the
pilot’s PTT switch , with ‘ XMIT ’ in the up position, and ‘ ICS ’ in the down position. However, it may be
configured to provide a ground to operate different circuitry to suit the needs of the user, and an appropriate
legend can be inserted.
Several of the connector pins can be configured to meet the requirements of specific installations.
Refer to JA95-N02
Interconnect sheet 5 of
5
.
The level of each of the six Transceiver MIC output signals can be
adjusted from 0.01 to 1 Vrms.
(Default 250 mVrms)
The Receive Sidetone Level can be adjusted from
0 to -12 dB of the rated phone Level. (
Default -6 dB )