background image

10

Die Schiene (A) auf der Innenseite der Möbeltür
oben und unten auflegen (siehe Abb.) und die
Position der äußeren Bohrlöcher anzeichnen.
Nachdem die Löcher gebohrt wurden, die Schiene
mit den mitgelieferten Schrauben befestigen.

20 mm

A

50mm

PR166

PR33

C

A

Die Abdeckung (C) in die Schiene (A) eindrücken,
bis sie einrastet.

Gerätetür und Möbeltür auf ca. 90° öffnen. Den
Winkel (B) in der Schiene (A) einsetzen. Gerätetür
und Möbeltür zusammenhalten und die Bohrlöcher
anzeichnen (siehe Abb.). Winkel abnehmen und die
Bohrlöcher mit Ø 2mm und einem Abstand von 8
mm von der Türaußenkante ausführen. Den Winkel
wieder auf der Schiene anbringen und mit den
mitgelieferten Schrauben befestigen.

8mm

PR167

A

B

PR168

PR167/1

D

B

Für eine allfällig notwendige Ausrichtung der
Möbeltür, den Spielraum der Langlöcher nutzen.

Nach Beendigung der Arbeiten den einwandfreien
Verschluß der Gerätetür überprüfen.

Die Abdeckung (D) in die Schiene (B) eindrücken,
bis sie einrastet.

11

WARNINGS

It is most important that this instruction book should be retained with the appliance for future
reference. Should the appliance be sold or transferred to another owner, or should you move house
and leave the appliance, always ensure that the book is supplied with the appliance in order that the
new owner can be acquainted with the functioning of the appliance and the relevant warnings.

If this appliance featuring magnetic door seals is to replace an older appliance having a spring lock
(latch) on the door or lid, be sure to make that spring lock unusable before you discard the old
appliance. This will prevent it from becoming a death-trap for a child.

This must be done before the appliance is built intoThese warnings are provided in the interest of
safety. You must read them carefully before installing or using the appliance.

General Safety

•  This appliance is designed to be operated by

adults. Children should not be allowed to tamper
with the controls or play with the product.

•  It is dangerous to alter the specifications or

modify this product in any way.

•  Care must be taken to ensure that the appliance

does not stand on the electrical supply cable.

Important: if the supply cord is damaged, it must
be replaced by a special cord or assembly
available from the manufacturer or its service
agent.

•  Before any cleaning or maintenance work is

carried out, be sure to switch off and unplug the
appliance.

•  This appliance is heavy. Care should be taken

when moving it

•  Ice lollies can cause frost burns if consumed

straight from the appliance.

Take utmost care when handling your
appliance so as not to cause any damages to
the cooling unit with consequent possible
fluid leakages.

The appliance must not be located close to
radiators or gas cookers.

Avoid prolonged exposure of the appliance to
direct sunlight.

There must be adequate ventilation round the
back of the appliance and any damage to the
refrigerant circuit must be avoided.

For freezers only (except built-in models): an
ideal location is the cellar or basement.

Do not use other electrical appliances (such
as ice cream makers) inside of refrigerating
appliances, unless they are approved for this
purpose by the manufacturer.

Service/Repair

•  Any electrical work required to install this

appliance should be carried out by a qualified
electrician or competent person

•  This product should be serviced by an authorized

Service Centre, and only genuine spare parts
should be used.

•  Under no circumstances should you attempt to

repair the appliance yourself. Repairs carried out
by inexperienced persons may cause injury or
more serious malfunctioning. Refer to your local
Service Centre, and always

This appliance contains hydrocarbons in its
cooling unit; maintenance and recharging must
therefore only be carried out by authorized
technicians.

Use

The domestic refrigerators and freezers are
designed to be used specifically for the storage
of edible foodstuffs only.

Best performance is obtained with ambient
temperature b18°C and +43°C (class
T); +18°C and +38°C (class ST); +16°C and
+32°C (class N); +10°C and +32°C (class SN).
The class of your appliance is shown on its rating
plate.

Warning:  when the ambient temperature is not
included within the range indicated for the class
of this appliance, the following instructions must
be observed: when the ambient temperature
drops below the minimum level, the storage
temperature in the freezer compartment cannot
be guaranteed; therefore it is advisable to use
the food stored as soon as possible.

Frozen food must not be re-frozen once it has
been thawed out.

Manufacturers’ storage recommendations should
be strictly adhered to. Refer to relevant
instructions.

The inner lining of the appliance consists of
channels through which the refrigerant passes. If
these should be punctured this would damage
the appliance beyond repair and cause food loss.
DO NOT USE SHARP INSTRUMENTS to scrape

Summary of Contents for JGI1424











Reviews: