JUNO JDK5575E, Instruction Booklet

Page: 10 / 14

19 GB
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Fitting the telescopic chimney
• To fit the upper section S first expand the two
side pieces slightly, hook them behind the
brackets 2 and close them together again until
they touch. Fix the upper section S to the
brackets 2 using four of the screws provided
in the bag of accessories (
fig. 8 ).
• Fit the lower section I as above, between the
upper section S and the canopy C using two
of the screws provided in the bag of
accessories.
• Chimney with venting grilles: Snap the venting
grilles into position in the apertures located
on the chimney section, so that the symbol
is turned upwards and the symbol faces
forwards. Also, when the hood is used in
recirculation mode, ensure that the grilles are
properly secured to the inside of the
recirculation spigot
R ( fig.9 ).
G
A18_
714_0
3
2
S
I
2
C
G
A18_
714_0
3
2
S
I
2
C
Fig. 8
Fig. 9