JUNO 944182408, User Manual

Page: 15 / 56

shows flashing and the time setting .
The oven turns off automatically.
8. Press a sensor field to stop the signal.
9. Turn off the oven.
When the Time Delay function
is turned on, the display shows
a symbol of the heating
function, with a dot and .
The dot shows which clock
function is on in the Clock /
residual heat display.
Setting: Set + Go
You can use the Set + Go function only
when the Duration is set.
1. Set a heating function and
temperature.
2. Set the Duration.
3. Press again and again until the
display shows flashing .
4. Press to set the Set + Go function.
The display shows and with an
indicator. This indicator shows which clock
function is activated.
5. Press a sensor field (apart from ON /
OFF) to start the Set + Go function.
Setting: Minute Minder
1. Press .
The display shows flashing and "00".
2. Press to switch between options.
First you set the seconds, then the
minutes and the hours.
3. Press or to set the Minute
Minder and to confirm.
4. Press or the Minute Minder starts
automatically after 5 seconds.
When the set time ends, the signal sounds
for 2 minutes and the display shows
flashing 00:00 and .
5. Press a sensor field to stop the signal.
Setting: Count Up Timer
1. To reset the Count Up Timer press:
again and again until display shows
flashing .
2. Press and hold: . When the display
shows "00:00" the Count Up Timer
starts to count up again.
AUTOMATIC PROGRAMMES
WARNING! Refer to Safety
chapters.
There are 25 automatic programmes. Use
an automatic programme or recipe when
you do not have the knowledge or
experience on how to prepare a dish. The
display shows the default cooking times
for all automatic programmes.
Automatic programmes
Programme number Programme name
1 VEGETABLES, TRADITIONAL
2 POTATO GRATIN
3 FARMER BREAD
4 ROLLS
5 FISH
15