Analogue Solutions | FUSEBOX | Manual
VCA
T h e V C A - t h i s i s a n
analogue circuit allows you to
alter the audio level of the
synthesizer. Typically the last
circuit in the audio chain.
VOLUME
Controls the output level of
the synth.
Headphone Volume
To the right of Volume is the
Headphone level control,
w i t h i t s c o r r e s p o n d i n g
headphone output socket. (A
stereo socket, though this is
a mono synth).
MODE
This switch sets how the
VCA level will be modulated.
UP
The VCA is Bypassed (held open).
Centre
No CV signal is patched to VCA level except any patched to the EXT CV socket.
Down
EG2 - Envelope 2 signal will modulate the VCA level.
To the right of the switch is an external CV input. Normally you would set the switch
to off (centre) when using this socket, though this socket is always ‘live’.
Use the external CV input socket to modulate the VCA from an alternative CV
source, such as EG1 or an external modular system.
Fusebox - 30 Oct 2017
| Page
!
28
