Analogue Solutions | FUSEBOX | Manual
Changing Mechanical Configuration
FITTING RACK EARS
Rack ears are optional.
First remove the Wood sides.
Then screw the optional rack ears to the side using the same six M4 screws.
CHANGING FROM VERTICAL TO HORIZONTAL
ORIENTATION
As standard, Fusebox is a vertical machine much like the Telemark.
It is possible to rotate the front panel to have it flat, like a desk top device.
This involves some basic mechanics.
First, unplug all the cables including power.
The front panel must be removed and rotated 180 degrees.
Remove the 7 front panel black screws.
Rotate, then replace 6 of the screws. The centre screw doesn't have a mounting
hole in the flat position. So either leave it out, or fit it (along with a M3 nut) to blank the
hole.
In the flat position you may want to fit the rubber self adhesive feet. Fit these right in
the corners where the metal work touches your work surface.
Rotating the front panel is an easy task and basic engineering common sense is all
that is needed. Doing this won’t invalidate your warranty. But doing something stupid
like snapping parts or snagging the cable, slipping and mashing the PCB, etc will! And
these will be very evident to us if it gets returned and there would be a repair charge.
Fusebox - 30 Oct 2017
| Page
!
43
