en
33
Cleaning the appliance
ã=
Caution
■
Do not use abrasive, chloride or acidic
cleaning agents or solvents.
■
Do not use scouring or abrasive
sponges. The metallic surfaces could
corrode.
■
Never clean shelves and containers
in the dishwasher. The parts may
become deformed!
Proceed as follows:
1. Before cleaning: Switch off
the appliance.
2. Pull out the mains plug or switch off
the fuse!
3. Take out the food and store in a cool
location.
4. Wait until the layer of frost has thawed.
5. Clean the appliance with a soft cloth,
lukewarm water and a little pH neutral
washing-up liquid. The rinsing water
must not run into the light.
6. Wipe the door seal with clear water
only and then wipe dry thoroughly.
7. Rinsing water must not run through
the drainage hole into the evaporation
area.
8. After cleaning reconnect and switch
the appliance back on.
9. Put the food back into the appliance.
Notes
■
Regularly clean the condensation
channel and drainage hole, Fig.
6
,
with a cotton bud or similar implement
to ensure that the condensation can
drain.
■
After cleaning, the stopper must be re-
inserted into the drainage hole of the
refrigerator compartment for functional
reasons.
Interior fittings
All variable parts of the appliance can be
taken out for cleaning.
Take out glass shelves
Fig.
4
Lift the glass shelves, pull forwards,
lower and swivel out to the side.
Take out shelves in the door
Fig.
5
Lift shelves upwards and take out.
Removing the container
Fig.
7
Pull out the container all the way and lift
to detach it.
To insert the container, place on the
telescopic rails and push into the
appliance. Attach the container by
pressing it down.
Summary of Contents for JC FA Series
Page 1: ...de Gebrauchsanleitung en Instruction for Use nl Gebruiksaanwijzing JC FA...
Page 55: ...1 2...
Page 56: ...3 4 5 6 7 8...
Page 57: ...9 2 4 3 1...
